🔧 Pool Fix Codes

Pentair › Pumps › IntelliFlo VSF

Priming Failure

Pump didn't prime within the Max Priming Duration

Pentair IntelliFlo VSF

What it means

If the pump isn't primed within the Max Priming Duration, it stops with a Priming Alarm for 10 minutes, then tries again. After five failed attempts it sets a permanent alarm that must be reset by hand.

Check this first

  1. Pool water level about halfway up the skimmer
  2. Empty the skimmer and pump baskets
  3. Lid and O-ring clean, seated and tight
  4. Suction valves open; look for air bubbles in the pump basket

When to call a pro

If it still won't prime, you likely have a suction-side air leak. Have a tech find it. Don't run the pump dry.

Usual part

Pump lid O-ring

Match the part number to your equipment's manual before you buy.

Source: Pentair IntelliFlo VSF Installation and User's Guide, Alerts and Warnings (p. 25)

Know a better fix? Send it in.