🔧 Pool Fix Codes

Raypak › Heaters › Digital 206A-406A

Water Sw Open

Water pressure switch open: not enough flow

Raypak Digital 206A-406A

What it means

The water pressure switch has opened. On a Raypak Digital that's the water flow safety, the same idea as Pentair's ERR PS and Jandy's CHECK FLOW.

Check this first

  1. Pump is running
  2. Filter is clean (check the pressure gauge)
  3. Every valve between the pump and heater is open

When to call a pro

If it stays with full flow proven, the switch itself is in question. Never jumper or bypass a safety switch on a gas heater.

Usual part

Raypak water pressure switch (match manual 241236 parts list)

Match the part number to your equipment's manual before you buy.

Source: Active Pool Supply table, citing Raypak Digital manual 241236 Rev. 50

Know a better fix? Send it in.