Jandy error codes
- CHECK FLOW Not enough water flow to the heater
- FAULT- CHECK IGN CONTROL Ignition problem (6 possible causes)
- FAULT - HIGH FLUE TEMPERATURE Flue temperature limit faulted
- FAULT- HIGH LIMIT Water past the internal limit, or a limit switch faulted
- FAULT- OPEN WATER SENSOR / SHORTED H2O SENSOR Water temperature sensor failed or wiring faulty
- FAULT- PUMP Status, not a fault: Maintain Temp mode with the pump off
- Ignition control LED flashes 1 flash air flow, 2 flame without call for heat, 3 lockout, steady control fault