🔧 Pool Fix Codes

Jandy › Heaters › JXi

Ignition control LED flashes

1 flash air flow, 2 flame without call for heat, 3 lockout, steady control fault

Jandy JXi

What it means

The ignition control LED: 1 flash = air flow fault; 2 flashes = flame with no call for heat; 3 flashes = lockout after 3 failed tries to fire; steady = ignition control fault.

Check this first

  1. Count the flashes
  2. 1 flash: clear the vent and air path
  3. 2 flashes: heater off, gas shutoff closed

When to call a pro

Give the flash count to the technician. 2 flashes means call right away.

Source: Active Pool Supply table, citing Jandy JXi manual H0574300 Rev. M

Know a better fix? Send it in.