🔧 Pool Fix Codes

Jandy › Heaters › JXi

CHECK FLOW

Not enough water flow to the heater

Jandy JXi

What it means

Jandy lists 4 causes: pump off, pump pressure low, pressure switch faulted, or a variable-speed pump set too slow.

Check this first

  1. Pump is on and running fast enough
  2. Filter is clean
  3. Valves are open

When to call a pro

With the pump proven, the pressure switch and siphon loop are next. Have a tech test them. Never jumper or bypass a safety switch on a gas heater.

Usual part

JXi pressure switch and siphon loop

Match the part number to your equipment's manual before you buy.

Source: Active Pool Supply table, citing Jandy JXi manual H0574300 Rev. M

Know a better fix? Send it in.

Jandy JXi CHECK FLOW error code | Pool Fix Codes